Skip to content
FANUC’s Medium Payload M710 Robot
In this system a M-710 series is working with an LRMate to pack delicate products into a crate. The operation uses iRVision to identify the product and follow specific packing instructions based on the model. Pieces are also wrapped in foam before being packed for shipping.
In this system a M-710 series is working with an LRMate to pack delicate products into a crate. The operation uses iRVision to identify the product and follow specific packing instructions based on the model. Pieces are also wrapped in foam before being packed for shipping.

FANUC’s six axis M710 robot series consists of six models for medium weight applications that differ based on the reach and load needed. The seventh model is a 5 axis ceiling mounted robot for tight, high speed use. The M710 series offers high joint speeds that help to minimizing cycle time.

The M-710iC robot is designed to handle operations such as:

  • Packing and palletizing
  • Assembly
  • Material handling
  • Machine load/unload
  • Part transfer
  • Case erecting
  • Bin picking

The M710 robot is perfect for dirty or harsh environments because the entire robot has an IP67 (ingress protection) rating. The robot is protected against dust and immersion of liquids between 15 cm and 1 meter.

Robot cells designed for performing material removal can become a harsh environment. This operations is perfect for the M710 series. The M-710 series' precise, high speed joints also make it the best selection for this process.
Robot cells designed for performing material removal can become a harsh environment. This operations is perfect for the M710 series because it also utilizes the robot’s precise, high speed joints.

The M710 series robot has vision support that can be integrated into the manufacturing process using iRVision software with 2D and 3D vision.

Motion Controls Robotics has used the M710 series in numerous robot cells for processes such as packing, machine tending, case erecting and material removal.


This M710 series robot is being used for CNC tending using a set of drawers for raw and finished parts. Click on the image to watch the video
This M710 series robot is being used for CNC tending using a set of drawers for raw and finished parts. Click on the image to watch the video

The video below shows an M-710iC being used in a random case erector for taping a variety of box sizes.

Since the boxes can be larger and would be filled upon entering the cell, the robot needs to be able to lift weights that would exceed the specifications of the FANUC M20IA/20 6-AXIS robot included in our standard case erector. The M710iC is FANUC’s next higher capacity robot.

fanuc710-download
If you would like more information about using the M-710iC robot, contact us through our robotic request form.

Back To Top