SNAPMate – Simplifying Cobot Automation

SNAP Resources (SNAP), a Motion Controls Robotics’ affiliated company introduces two portable SNAPMate Stations featuring either a FANUC CR-15iA or FANUC CR-7LiA collaborative robot. The SNAPMate combines the experience of a FANUC, level four integrator in Motion Controls Robotics with the flexibility and ease of use of a Ready Robotics Forge workstation making it a snap for manufacturers to quickly increase productivity through collaborative automation.

SNAPMate Applications


A SNAPMate Station with a FANUC Cobot provides manufacturers the tools and flexibility to increase productivity through the use of automation to accomplish a variety of smaller volume or short run applications:

  • Machine tending – Load and unload a variety of CNCs throughout the facility
  • Pick and place operations
  • Assembly
  • Inspection
  • Case packing
  • Palletizing

The SNAPMate Station

Program robots without code using quick, touchscreen setup. SNAPMate is the perfect option for out-of-the-box automation that is user-friendly as well as re-deployable to different tasks throughout your facility.

  1. FANUC Cobot (FANUC CR-15iA or FANUC CR-7LiA)
  2. FANUC R30iB Plus controller
  3. A multitude of optional grippers/suction cups
  4. Manual Quick change for different grippers/cups
  5. Force sensor & hand guidance
  6. Pull handles and casters for easy relocation of the unit
  7. Worktable grid for part/product setups
  8. Adjustable height screen
  9. Emergency Stop

FANUC collaborative robots are the best choice for durable, long-lasting performance and adding a Forge Controller makes programming a snap. By combining these two technologies, a line has been drawn in the sand.


Collaborative Robot Selection

Robot Specifications Download Spec Sheet
collaborative robotCR-15iA Payload: 15 kg / 33 lbs

Reach: 1,441mm / 57 in

Download “SNAPMate15 Robot” web-cr15-snap.pdf – Downloaded 3648 times – 149.68 KB
best collaborative robotCR-7iA/L Payload: 7 kg / 15 lbs

Reach: 911 mm / 35 in

Download “SNAPMate7 Robot” web-cr7ia-l-snap.pdf – Downloaded 2649 times – 152.07 KB

With the SNAPMate, you simplify cobot automation through the use of the Ready Robotics Forge software and controller. The Forge controller makes programming a FANUC cobot, mobile workstations intuitive by using hand guidance with drag and drop programming. You just roll the station up to the machine, Lead-to-teach for quick, easy programming of points, and start working. After teaching multiple points for a task, simply use landmark hardware/software (software accounts for the station not being in the exact position as when programmed the first time) for easy relocation back to a previously programmed machine (can program and save several different programs to call up).

Easy as a snap from ordering to delivery to the first job

  1. Select the SNAPMate Station you need based on payload and reach.
  2. Chose from a variety of gripper types for use with collaborative robots.
  3. SNAP offers other add-ons that will help you get up and running in a snap.
  4. Purchase of a SNAP comes with delivery and a 1-hour instruction session with a SNAP engineer
  5. Roll your SNAPMate up to the first machine and lock wheels into place.
  6. Use Drag and Drop functions and hand guidance to program the first job.
  7. Let your SNAPMate start working

Visit the SNAP website or contact Motion Controls Robotics to learn more about the SNAPMate Station.

Related Posts