skip to Main Content
Presentation at the 2013 International Conference on Vision Guided Robotics

Motion Controls Robotics, Inc. had the privilege of giving a presentation at the 2013 International Conference on Vision Guided Robotics at Georgia Tech University on Thursday, November 14, 2013.  This PowerPoint presentation was assembled based on the experience of our talented robot and PLC programmers at MCRI.  For a look at the presentation, titled "The Good, Bad, Ugly and Beautiful of Vision Guided Robot Applications", a study of 10 different robotic vision applications including photos and video, click on the following link.

The meeting was attended by users, suppliers and academics from across the globe.

All topics covered at the conference;

The Basics of Machine Vision, David Dechow, FANUC Robotics America

Successfully Integrating Vision Guided Robotics, David Dechow, FANUC Robotics America

Practical 2D Vision Guided Robotics (VGR)

  • Overview of 2D Vision Guided Robotics, David Dechow, FANUC Robotics America
  • How To: Vision Guidance, the Definitive Guide, Eric Hershberger, Cognex Corporation 
  • Using 2D VGR & Terminal Guidance in Aerospace Manufacturing, Mark Anderson, Comau, Inc.

Practical 3D VGR

  • 3D Vision Guided Robotics Overview, Steven Prehn, Robotic Guidance
  • Image Processing Techniques for 3D VGR, Heiko Eisele, MVTec, LLC
  • Robotic Guidance – Putting It All Together, Joe Cyrek, Recognition Robotics

The Business Case for VGR

  • Putting Vision to Work: Total Cost of Ownership (TCO), Scot Lindemann, JR Automation

Key Technologies in VGR

  • Virtual Vision Guided Robotics, David Bruce, FANUC America Corporation

Advanced 3D  VGR Solutions

  • New Trends in 3D Bin Picking, Adil Shafi, ADVENOVATION
  • Intelligent Automation, Hob Wubbena, Universal Robotics
  • Model Based Vision for Inspection and Robot Control, Henrik Christensen, Georgia Institute of Technology

VGR Application "How-To’s"

  • Good, Bad, Ugly and Beautiful of VGR Applications, Motion Controls Robotics, Inc.
  • Design and Implementation of Vision Guided Robots at GM, Brian Musser and Lance Ransom, General Motors
  • Large and Low Contrast Vision Challenges, Jeff Boeve, Epoch Robotics

 

Upcoming Events

No upcoming events

Read More Articles

Sandusky County After Hours Event

Motion Controls Robotics is sponsoring a Business After Hours event at the Down Thyme Café…

Inertia Calculations by Your Robot Integrator Are Critical For Proper Robot Selection and End of Arm Tool Design

by Chris Shepherd, Motion Controls Robotics Inc Successful operation of a robot is highly dependent…

Grabbing Attention with Mechanical Grippers

This is the first of four articles covering the four main categories of grippers used…

Machine Vision – See the Light

Lighting can be used in different ways to compliment machine vision applications. The most common…

leica
Tour FANUC’s Centerpointe Technology Center

Have you ever wanted to learn all about FANUC robots, get a close-up look at…

Back To Top